Mar 22, 2019 | By Thomas
We’ve reported before on 3D printing technology being used to make parts for satellites and other spacecraft, and this trend looks set to continue in the future, with Thales Alenia Space being one of the major companies leading the way.
The company, which is a joint venture between Thales and Leonardo, first began taking advantage of 3D printing back in April 2015. Its TurkMenAlem MonacoSat satellite was launched with a 3D printed aluminum antenna support, and since then every satellite it sends into orbit has a similarly lightweight 3D printed antenna support, as well as 3D printed reflector fittings.
The Koreasat 5A and 7 telecommunication satellites, orbited in 2017, featured the largest 3D-printed spacecraft parts ever made in Europe at the time. Today, Thales Alenia Space is taking 3D printing into series production to make components for telecom satellites built on the company’s new all-electric Spacebus Neo platform.
Spacebus Neo (courtesy: Thales Alenia Space/Master Image Programmes)
Spacebus Neo will feature four reaction wheel brackets made of aluminum and 16 antenna deployment and pointing mechanism (ADPM) brackets: four in aluminum and 12 in titanium. The innovative 3D-printed reaction wheel bracket is designed to meet market demand for lower costs, now reduced by about 10%, and shorter lead times, with production schedules cut by one to two months. The new part is also 30% lighter and offers improved performance.
The metal powder-bed fusion technique used for these parts allows series production with a high degree of customization, making it possible to tailor designs to the exact requirements of each new mission. The four reaction wheel brackets for each satellite, for example, are 3D printed as two sets of symmetrical parts, while the orientation angles and interfaces of the ADPM brackets can be adjusted to their specific function and position on each satellite. Thales Alenia Space has also incorporated connector and cable fittings directly into the overall design, which is printed as a single-piece part, thereby avoiding additional assembly requirements.
To produce these large (466 x 367 x 403 mm) reaction wheel brackets, the company makes uses of the huge Concept Laser Xline 2000R metal 3D printer, which has a build chamber of 800 x 400 x 500 mm.
The first four parts have already been integrated on Eutelsat’s Konnect satellite, which was successfully mated earlier this month. Other Spacebus Neo platforms will also feature organically designed 3D-printed parts in the near future.
Konnect (courtesy: Thales Alenia Space/Master Image Programmes)
“Eutelsat is now fully involved in the development and use of 3D-printed satellite parts at all stages of the process, from design to final delivery,” says Philippe Sicard, engineer at Eutelsat. “These parts are recognizable by their highly specific design. And to ensure the most stringent quality standards, the overall process and individual components are robustly traceable and we have set up a comprehensive testing and inspection process.”
Posted in 3D Printing Application
Maybe you also like: